Sinotruk 8X4 Concrete Mixer Truck
  • Specification

Product Features

1. The tank body uses double helical blades that makes its density moderate, with symmetrical mixing board on the front taper place; double blades and guiding blades of discharge are installed on the outlet of tank, which makes the discharge more evenly, faster in speed, and convenient for the pumping transportation of other devices (such as automobile pump).

2. Low angle for mixing drum can extend the service life of hydraulic pump, motor and reducer. The sub frame uses high intensity square tube with damping in the central area that can play role when vehicle is at full load and under the bad conditions of road, which can lower the center of gravity of truck and make it move more smoothly.

3. The upload production of this mixer adopts multiple advanced technology, which can produce various types of mixer in volume such as 3m3, 5m3,6m3,8m3, 9m3,10m3, 12 m3 etc.

 

Truck Model

ZZ1317N3667A

ENGINE

Make: SINOTRUK

Diesel 4-stroke direct injection diesel engine

Engine model: WD615.47, Euro II, 371HP

With Oil Bath Filter System

6-cylinder in-line with water cooling, turbo-charging and intercooling

Displacement: 9.726 L

Optional: WD615.62 / WD615.87 / WD615.69 / WD615.47

Cabin

HW76 cab, with one sleeper and two seats, 2-arm windscreen wiper system with three speeds, damped adjustable driver’s seat, with heating and ventilating system, exterior sun visor, safety belts, adjustable steering wheel, air horn, air conditioner, with transverse stabilizer,with 4-point support fully floating suspension + shock absorber.

High steel bumper, With inter-cooler fence

Option: air suspension driver’s seat, high roof double bunk, fire extinguisher, warning light

Clutch

Single-plate dry coil-spring clutch, hydraulically operating with air assistance

Transmission

HW15710 / HW19710, 10F & 2R

Ratio: 14.28, 10.62, 7.87, 5.88, 4.38, 3.27, 2.43, 1.80, 1.34, 1.00, 13.91(R1), 3.18(R2)

Propeller Shaft

Double universal joint propeller shaft with gear-shaped coupling flange

Front Axle

HF9, 2 X 9000 KGS

Steering with double T-cross section beam

Optional:HF7, 2 x 7000kgs, drum type

Rear Axle

HC16,2 x 16000 KGS

Pressed axle housing, central single reduction with hub reduction and with differential locks between wheels and axles.

Ratio::4.8 / 5.73

Optional:ST16,double reduction, speed ratio:3.93,4.42,4.8/ MCY13, 2 x 13000kgs

Chassis

Frame: U-profile parallel ladder frame with section of 300x80x8mm, and reinforced subframe all cold riveted cross members

Front suspension:10 semi-elliptic leaf spring, hydraulic telescopic double-action shock absorbers and stabilizer

Rear suspension:12 leaf semi-elliptic springs, bogie spring and stabilizer

Steering

ZF power steering, model ZF8118, hydraulic steering with power assistance

Overall Dimension

10820 * 2550 * 3900mm

Mixer tank effective volume

Size:16cbm

With Italian brand Bonfiglioli reduction gears, America brand Eton oil pump and motor

Brake

Service brake: dual circuit compressed air brake

Parking brake (emergency brake): spring energy, compressed air operating on front shaft and rear wheels

Auxiliary brake: engine exhaust brake

Optional:EVB, ABS, AUTOMATICSLACK ADJUSTER

Tyres

12.00R20,Radial (steel wire) Tires,1 spare tyre

Option: 12.00-20, 12R22.5, 315/80R22.5, 12.00R24

Electrics

Operating voltage: 24 V, negative grounded Starter: 24 V, 5.4 Kw

Alternator: 3-phase, 28 V, 1500 W Batteries: 2 x 12 V, 165 Ah

Cigar-lighter, horn, headlamps, fog lights, brake lights, indicators and reverse light

Instrument Panel

Active check central control with indicators, with this integral instrument the daily manual checks on the vehicle and combined indicators of compressed air pressure, coolant temperature, engine oil pressure and battery charging.

Color

Optional



 
Email Us
Leave a Message
Your Name:*
Your Country:
Your Tel:*
Your E-mail:*
Interested Products:
Message Content:
 
  • Hot Products